Double
flank Gear Roller Tester Model:- GRT-1 |
| Module
capacity |
0.3 to 2 / 80 to 13 Dp. |
| Max.
Ge. Pinion dia. with vertical support attachement |
108
mm. |
| Total
test shaft length |
250
mm. |
| Max. Gear dia. |
250
mm. |
| Min.Cd. |
15 mm between pantograph slide bore
and work table center bore.
Note: Less Cd. Can be possible by special bracket
attachment |
| Work table slide max. Load |
20
Kg. |
| Pantograph Slide Max. Load |
3 Kg. |
| Measuring Force |
Min. 1N-Max.30 N |
| Measuring Resolution |
0.001 or 0.01 as per fitted measure
instrument. |
| Repetablility |
0.002 in normal condition |
| Work table slide |
100 / 165 mm. |
| Pantograph Slide |
100 / 165 mm. |
| Basic M/c Length, Hight & width |
490 x 10 x 220 mm. |
| Height with Vertical support |
440 mm. |
| Cross Side attachment use for
chordal, over pin, Gauging etc. cross measure of job. |
85 /120 mm Table. |
| Weight of M/c with attachment |
35 Kg. |
| Vertical attachment max. center
length between two head |
220 mm. |
| Work table max travel |
100 mm. |
| Pantograph table max. deflection |
6mm |
| Cross slide max. travel |
50 mm. |
| Table bolting std. |
8 or 6 mm. |
| Table T nut size |
8 x 14 x 12 h (6 x 1 thread) |
| Vertical att. head bore size |
20 mm |
| Vertical Head center Quill travel. |
80 mm. |
M/c require floor space
(With Cross Slide) |
Length Height width
490 x 440 x 350 |
