Gear Hobbing Machine
 

>> Universal Gear Hobbing Machine
>> Spur Hobbing HL-2
>> Auto Index Milling SM-1
>> Single Spindle Automat
>> Sliding Head Lathe SH-2
>> Double Flank Gear Roller Tester
>> Single Lip Cutter & Drill Grinder DG2
>> Auto Index PCD model D1
  

SPECIFICATION OF MODEL A-16 & A-26 SINGLE SPINDLE BAR AUTOMAT
* Max. bar CAPACITY 16 mm Round, 13 mm Hex, 11 mm square A-16 MODEL 26 mm Round, 22 mm Hex, 18 mm square A-26 MODEL
* Strock of CROSS SLIDE 22 mm by 1:1 Cam Ratio
* Strock of VERTICAL SLIDE (Extra Acce.) 22 mm by 1:1 Cam Ratio
* Tail Stock travel 100 mm Max.
* Tail Stock DRILLING capacity 13 mm by collet type quill, Bigger by Sp. quill
* FLOATING QUIL DRILL travel ( Extra Acce.) 60 mm Max.
* DOUBLE DRILLING attachment (Extra Acce.) 13 mm drill Cap., 40 mm length
* HIHG SPEED DRILLING attachment 4 mm drill capacity
* TWO spindle DRILLING & THREADING attachment, MOTORISDE (Extra Acce.) 13 mm drill Cap., 8 mm threading Cap.
* SMALL THREAD cutting attachment MOTORISED ( Extra Acce.) 4 mm threading Cap.
* LONG TURNING attachment (Extra Acce.) 70 mm travel
* SPINDLE R.P.M. 900 to 2000 RPM, 12 step, A-16 MODEL 550 TO 4000 RPM, 12 step, A-26 MODEL
* PRODUCTION rate 28 to 2000 Pcs./Hour. as per job
* POWER 2 KW. for MAchine ( More for extra Acce.)
* SPACE requirement 1400 x 600 mm Excluding Bar stock pipe
* SHIPPING Dimension & Weight 1500 x800 x 1800 height, 1100 Kg. Approx.
Kepping in step with today's technological strides, Hence the product supplied may have slight different features
 
STANDARD ACCESSORIES WITH MACHINE :
* MACHINE mounted on heavy TABLE with oil basin. * Coolant TANK. * Coolant Pump with filter & presure control. * All Electrial system built with control & safety. Machine LAMP with oil guard STAND. * AUtomatic ELect. SHUTTER for auto stop. * Bar STOCK PIPE and stand with gravity PUSHER arrangement. * Feed change GEAR Set. * Two CROSS SLIDES. * Std. BARSTOP with Cam. * SPANNER SET for MAchine operation. * Single tool OPEN HOLDER for front
 

SPECIAL EXTRA ACCESSORIES :
* LONG TURING atach, front or rear. * Double VERTICAL SLIDE. * Bar STOP & centering atach. * OVERHEAD swing BAR STOP. * ROCKING swing bar stop. * DOUBLE DRILLING atach. * Two spindle DRILLING & THREADING atach. Motorised. * SMALL THREADING atach. Motorised. * HIGH SPEED DRILLING atach. Motorised. * Hand CHUCKING atach. * Work pice COUNTER. * Tail Stock FLOATING QUILL atach. * Various type of Std. TOOL HOLDER & sp. tool holder. We Manufacture Sp. CAM SET & TOOLONG as per job. * Acrylic OIL GUARD.
Note :  Special attachment for specific job, Please send your 'JOB DRAWING' or a SAMPLE for this purpose.
 

IMPORTANT HINTS FOR OUR PRODUCT :
This Machine is made on the lines of very succesful GERMAN design. Our products always ensure INTERNATIONAL STANDARD in quality and performation. Most of CAST and STEEL parts are made from suitable alloys, HARDENED and HEAT TREATED. MAIN GUIDE BAR of the machine are thick HARD CHROME PLATED & LAPPED on Harden Material for more durability. All machining parts are made to CLOSE TOLERANCE by grinding and lappinng. Guaranted INTERCHANGIBILITY of Parts, Accesories and attachment with already installed machines of this kind are some of the virtues TO MAKE our machine a BEST BUY for you.
STANDARD ACCESSORIES :
* Heavy cast TABLE with Oil Reservoir, Wide oil BAsin & Tool Case. * COOLANT  Pump with Drive. Std. Plunge CAM. * DEBURRING Attachment. * 20 SPANNERS Kit with Box . * Oil Gun. * Toggle type Centre attachment with heavy thurstbearing for job clamping. * Built in AUTO switch to start/ stop Auto Cycle. Amodern electrical PANEL for full safety  & control in steel cabinet. * std. set of 44 gear for fEED & INDEX suitable for Teeth cutting up to 40 Nos. & their multiple.

SPECIAL & ADDITIONAL EQUIPMENT :
* Special index change gears. * Plunge Hobbing CAm as per job. * Clamping Acce. as per job. * Special fly cutter for from teeth wheel. * Piece counting attachment * Big size WORK SPINDLE with manually quick collet attachment. * Hob Spindle fly wheel. * Magazine type automatic loading unloading attachment.

IMPORTANT HINTS :
Our Machine serves satisfactory in precision industries where small gears are used, such as Typewriter, water Meter, Electric Meter, Taxi & Rickshaw Fare Meter, Bicycle Gear-Hub, Wall clock, Time Pice, Household Grinder, Mixer, Table Fan, Telephone Gear Precision Instruments etc.